BODY CREAM PRODUCTION

COMMERCIAL BODY CREAM PRODUCTION

The skin being the largest organ in the body needs proper care and attention. And body cream has served well in the protection and nourishing of the body against the abrasive condition of our environments.

The use of body cream, lotions and other skin care products in maintaining, repairing damage skins, enhancing the look and appearance of the skin can never be over exaggerated.       

Knowing what kind of body cream to use for your type of body skin; light skin, chocolate skin or fair complexion or how you can make your own natural body cream can be of good health benefit to you.

The knowledge of the body cream production process or body lotion can transform you into a mega millionaire if you plan to follow it as a dream. My dear, believe me, you can make a living producing your very own quality natural body cream brands into the striving market. No joke!

You don’t need an almighty formula to start; you even start at the comfort of your apartment. Follow the steps below;

Learn more about: AN ENTREPRENEUR

BODY CREAM MAKING MANUFACTURING EQUIPMENT

1.       Heater

2.       Thermometer

3.       Stirrer

4.       Mixing chamber

5.       Weighing Scale

BODY CREAM PRODUCTION MATERIALS AND QUANTITY

1.       Methy Paraben                                 5 mls

2.       Emulsifying wax (crude)                 3 mls

3.       Propylparabe Stearic-acid                0.2 grams

4.       Propylene glycol                              3 mls

5.       Water                                                81 mls

6.       Cetyl Alcohol                                   3 grams

7.       Colourant                                         To taste

8.       Mineral Oil                                      0.1 grams

9.       Fragrance                                         As desired

10.   Jelly                                                 5 grams

BODY CREAM PRODUCTION MAKING PROCEDURES AND PROCESSES

1.       Mix no 1-5 together in a heating chamber

2.       Heat until the mixture reaches around 75 0 C

3.       Also mix no 6-8 together in a heating chamber

4.       Turn on the heat, until the mix is at about 75 0 C

5.       Mix both phase with continuous stirring, turn off the heat

6.       Add perfume and colour as desired, when the temperature drops to about 40 0 C.

7.       Package ready for the market.

Read More

PRODUCTION OF HAIR SHAMPOO

COMMERCIAL HAIR SHAMPOO PRODUCTION

Shampoo is a viscous liquid that is used for the washing of hair and scalp. It is a most have for the ladies and even men and guys who are concerned about the proper care of their hair. Production of natural shampoo from plant blend will go a long way to your kind of shampoo brands in the striving shampoo market.  

The production of hair shampoo process must be in coherence with standard and quality formulation. This will play a vital role in the market when pushing for high product demand, and satisfactory customer report.

Quality product is the key to all your production plans; use of very nice  fragrance, flavor, good marketing campaigns are all part of the plans and feminine colour are as you should be aware of that majority of your potential customer are ladies.    

Learn more about: AN ENTREPRENEUR

HAIR SHAMPOO MAKING MANUFACTURING EQUIPMENTS

1.       Mixer

2.       Measuring Cylinder

3.       Weighing Scale

HAIR SHAMPOO PRODUCTION MATERIALS AND QUANTITY

1.       Detergent                        12 litres

2.       Sodium Chloride             500 grams

3.       Formalin                           500 mls

4.       Propylene glycol             2 litres

5.       Deionised water             0.5 litre

6.       Glycerine                         1 litre

7.       Colourant                        500 ml

8.       Pacol or Antisol              1 kg

9.       Fragrance                        As desired

10.   Sodium lauryl sulphate 150 grams

HAIR SHAMPOO PRODUCTION MAKING PROCEDURES AND PROCESSES

1.       Add 12 litres of detergent into a the mixer and add 50 litres of water and stir

2.       Add salt (sodium chloride)

3.       Add sodium lauryl sulphate

4.       Check out the weight C.M.C and pour into a different bowl

5.       Add 1 litre of glycerin and 2 litres of propylene glycol the C.M.C and stir till uniform blend is achieved

6.       Pour the mixture gently into the shampoo with rapid stirring

7.       Add formalin, colourant and perfume and continue stirring for 5 mins

8.       Sieve and package.

Read More

PRODUCTION OF COMMERCIAL WOOD POLISH WAX

COMMERCIAL WOOD/CAR POLISH WAX PRODUCTION

 Wood polish or wood wax can be liquid oily forms. It is usually used to protect, preserve and enhances the natural beauty of woods by continually keeping it ever shinning, both finished and unfinished wood furniture’s.   

The demand of good wood polish wax by makers of household furniture, interior decorators, and others cannot be over exaggerate. Wood wax helps maintains the quality of wood, from drying out or deteriorating, and from insect attacks.

You can start your own homemade wood polish factory from the comfort of home without hassle. You don’t need million to get started, because most of the equipment’s and production materials are readily available at amazon store.  

Learn more about: AN ENTREPRENEUR

you can even make wax pad from the same line of production by just getting good pad a whole sales price from amazon store. 

wax pad

   

You can start a work experiment by buying raw materials from amazon stores

WOOD/CAR POLISH WAX PRODUCTION EQUIPMENT/REQUIREMENTS

1.      Boiler or mixer

2.      Measuring Cylinder

3.      Weighing Scale

WOOD/CAR POLISH WAX PRODUCTION RAW MATERIALS

1.      Pine Oil                             Half a litre

2.      Linseed oil                         4 litres

3.      PVA                                   1/3 litre

4.      Methylated spirit               Half a litre

5.      Vinegar                              1 litre

6.      Turpentine                         1 litre

WOOD/CAR POLISH WAX PRODUCTION MAKING PROCEDURES AND PROCESSES

1.      Set the heating apparatus and turn the heater on

2.      Measure linseed oil and warm slightly

3.      Add turpentine and vinegar and mix properly

4.      Add PVA, pine oil and Methylated spirit, stir and turn off the heater

5.       Allow to cool down and package

Read More

PERFUME AND AIR FRESHENER PRODUCTION

COMMERCIAL PERFUME/AIR FRESHENER PRODUCTION

Fragrance and perfume on the body, or on the cloth, and in our homes and automobiles are compelling personality that gives the body and our environments soothing aroma.

Most people see the perfume and air freshener as part of daily gears when going out and when doing household chores.    

“Perfume is a mixture of fragrant essential oils or aroma compounds, fixatives and solvents - used to give the human body, animals, food, objects, and living-spaces "a pleasant scent"

…The use of perfumes in some of the earliest human civilizations. Modern perfumery began in the late 19th century with the commercial synthesis of aroma compounds such as vanillin or coumarin, which allowed for the composition of perfumes with smells previously unattainable solely from natural aromatic alone…”  - https://en.wikipedia.org/wiki/Perfume”

You can start your own perfume manufacturing company from te comfort of your home. You can even customize products towards meeting specific individual needs. What I am about to reveal below can give such edge in the market.

Marketing perfumes come easy when you have very good scents or aroma to sell to the world. This gives infinite opportunity as long as you allow creativity to govern your production and marketing concept.

Learn more about: AN ENTREPRENEUR

PERFUME MAKING MANUFACTURING EQUIPMENTS

1.     Mixer chamber

2.     Measuring cylinder

3.     Stirrer

PERFUME MAKING PRODUCTION MATERIALS

1.     Methanol 50 grams

2.     Avalon (Raw perfume) 15 kg

3.     Colourant (optional) 2.2 kg

4.     Glycerine (optional) 1.5 kg

5.     5 Water (optional) 12 kg

6.     Blue river (Raw perfume) 1.9 kg

7.     Tahoe (Raw perfume) 50 kg

8.     212 (Raw perfume) 1 kg

PERFUME MAKING PROCEDURES AND PROCESSES

1.     Wash all the apparatus to be used very well to avoid impregnation of any unwanted odour or aroma

2.     Measure out the raw perfumes into the mixing chamber

3.     Add the methanol and stir to homogeneity

4.     As the water (if you want to). I should tell you that adding water will reduce the quality of your perfume, but if you are producing for the off the shelf market, you will need to add water in order to maximal profit. But if you are into bespoke production, please do not add water

5.     Add glycerin (only if you are into bespoke production)

6.     Add colour if you want, but be informed that it might stains white cloths if used on it

7.     Allow for at least 2 hours before packing

8.      Package your product ready for the market

Read More

LIQUID SOAP PRODUCTION

COMMERCIAL LIQUID SOAP PRODUCTION

Today, liquid soap is fast replacing solid soap, be it in the laundry or the toilet soap.  It is mostly used dish washing, car wash, laundries effects and toilet steam bath. There is a ready market for liquid soap as it demand remains stable eternally, especially it comes with good fragrance, good foaming ability, and a good colour.

LIQUID SOAP PRODUCTION EQUIPMENTS
Mixer
Stirrer

Stamping machine
Heater

Hydrometer

Weighing scale
Packaging material

Measuring cylinder

CHEMICALS FOR MAKING SOAP
Sulphoric Acid
Textaporle
Caustic soda (Naoh) 1 kg    -please do not touch
Soda ash (light) 500 grams
Nutrisole 
Formalin
Colorant To taste
Water 30 litres
Fragrance To taste

LIQUID SOAP MAKING PROCEDURES
Prepare the Sulphoric Acid and Textaporle solution together; stir properly for fine blend
 
Prepare the caustic soda solution by dissolving 1kg of caustic soda into 4 litres of water solution;

Leave it for at least 24 Hours plus for proper blend and dissolution.

Ensure it complete 24 Hours or more to avoid your soap being corrosive on the users’ skin and clothes.

Confirm that it was a density of 1275kg/m3.

Add soda ash to the caustic soda solution and stir vigorously until well blended.Add the Nutrisole and Formalin and continue to stirring
Add the colorant to the solution and continue stirring.
Add the fragrance and package ready for the market.

Learn more about: AN ENTREPRENEUR

LIQUID SOAP MAKING  PROCEDURES FOR PROFESSIONALS

Weigh out the formulation quantity of water

Add sodium EDTMP- ethylenediamine tetra(methylene phosphonic acid)

Add 90% of the formulation quantity of NAOH to formulate

Add lab. Mix for 10 mins.

Add GLYCERIN,

And MAGNESIUM SULFATE –HEPTAHYDRATE to the formulation.

Mix until dissolved.

Check the temperature of the batch.

The batch must be 40*c before SLES is added.

Add SLES, mix until fully dissolved.

Add FRAGRANCE.

And add DYES SOLUTION

Check PH, PH must be 6-7, before adding PARMETOL

If PH < 7, add more NAOH. If PH >7 add more LAB.

When adding NAOH /LAB to batch,

Increase speed slightly (300 – 400) until PH 6-7.

PH = decants into appropriate containers.

NB: IF THE PRODUCT HAS SEPERATED OVERNIGHT, WARM THE PRODUCT IN A WATER BATH AND MIX AT LOW SPEED (I.E 20 rpm) FOR 5 MINS BEFORE DECANTING IN BOTTLES.

Read More