PRODUCTION OF STAIN REMOVER

PRODUCTION OF STAIN REMOVER FOR YOUR LAUNDRIES, TILES, ZINC AND TOILET DISHES.

STAIN REMOVER/BLEACH RAW MATERIALS 

1. Sodium hydroxide                    500 grams
2. Sodium carbonate                    1 kg
3. Water                                          30 litres
4. Hydrogen peroxide                  250 grams
5. Fragrance                                   As desired
6. Hydrochloric acid (HCL)         1 bottle

I am tempted to ask; do you have challenges getting quality tiles cleaner or refined cleaning agents or good cleaning product for your tile's grout, hard ceramic surfaces, and bathtub? Maybe your toilet closets and zinc is no longer presentable for visitors and friends because of stubborn dirt and stains. And how often do you clean, wash or scrub your bathroom or toilet tiles and floors? The key to a sparkling toilet and kitchen zinc, clean tiles, and bathtubs in our homes and offices are good maintenance using tiles cleaners.

Today, in modern day Nigerian, almost every households uses tiles, bathtubs, kitchen or toilet zinc. So, this makes the production of tiles, floor, bathroom, toilet or kitchen cleaner solution an essential commodity in every household, and on that note can serve as a good source of income for small-scale entrepreneurs.

A well-produced tile cleaning agents or toilets cleaner solution can change the surface of your floors, bathtubs, tiles, toilets and kitchen zinc by just applying the solution to the surface. After application, please leave for 30 minutes for thorough sparkling clean effects, then mob or rinse or clean the surface of your bathtubs, tiles, toilets and kitchen zinc with water, and you enjoy a sparkling clean environment all through.

There are a lot of households who have tiles in their houses. With a little addition of fragrance to the tile cleaner, you are sure to get people to buy your product.

PROCEDURES FOR THE PRODUCTION OF STAIN REMOVER

1. Measure out 6 liters an of acetone into the mixing chamber.
2. Add 3 liters of ethanol to it.
3. Add 1kg of oxalic acid and leave to stand for 3 days.
4. Add a good fragrance of your choice
5. Stir and sieve.
6. Package for the market.

You can learn more about being a young entrepreneur by clicking the link: ALL YOU NEED WHEN STARTING YOUR OWN SMALL SCALE BUSINESS

LAUNDRY AND STAINED CLOTHES

Having or wearing stainless clean clothes or fabrics require utmost care and good stain remover products for your laundries. Stain remover help removes stubborn stains and dirt from our clothes. Today, production of stain remover, especially for white and coloured clothes can be a very lucrative laundries product for a young small-scale entrepreneur.

Have you ever wonder what is the secret of a good laundry business or dry cleaner? Or seeing a man or woman wearing a stainless clean clothes. Or are you at lost on what to do when you have a stubborn stain on your clothes and fabrics? The secret is still the same; a quality stain remover.

You can start a homemade production of stain remover for clothes, tiles or carpets of your own soothe. Production of stain remover is relatively cheap, and are not capital intensive. And you can start your own small-scale stains remover production from the corner of your home with ease.

Beautifully, then the market for your produced stain remover packs areunlimited. You can take your products to hotels, eateries, schools, the laundrymen/women or dry cleaners in your area for marketing and bulk supply. You can even market your finished stain remover products to your friends and neighbors.

PROCEDURES FOR STAIN REMOVER AND BLEACH PRODUCTION. 

1. Weigh 1 litre of HCL into a bowl
2. Weigh out 500 grams of sodium hydroxide and 1 kg of sodium carbonate into the same bowl
3. Add 5 litres of water and stir very well
4. Leave it for 3 hours and add the remaining 25 litres of water
5. Stir very well and leave to stand overnight
6. Sieve out and add the hydrogen peroxide
7. Add a good fragrance of your choice
8. Stir well and package

Read More

PRODUCTION OF DISINFECTANT

DISINFECTANT AND GERMICIDE PRODUCTION

DISINFECTANT PRODUCTION MATERIALS AND QUANTITY
Pine Oil                            10 cl
Phenol (water-based).   30 cl
Carbolic acid                   30 cl
Texapol                            10 cl
Water                               7.5 litres
Colourant                        To taste
IPA/Menthol                     2 litres
Preservative (formalin) 5 cl
Flavour                             To taste

Disinfectant and germicide as the name implies are the liquid solutions used to kill germs on our skins and also in our environment. It is usually added into the bathing water in order to kill germs that might be in the bathing water or on the skin. Disinfectant and germicide should be recommended for every household for competent battling of disease-causing bacteria, micro-organisms, bugs and germs. Bathing regularly with a disinfectant will help ensure continuous good health.

The production of disinfectant and quality germicide comes handy as an indispensable part of first aid box, where it is used for cleaning of wounds and other similar emergencies.

Germicide disinfectant is also added in our laundry water to help kill any germ that might be on the cloth. It is also added to water that is used for scrubbing our floor, toilets, tubs and bathroom closet.

The production of disinfectant and germicide is a viable business venture as it is a product that is needed by every household, schools, hotels, and hospitals. If you are planning to start the disinfectant and germicide production business, you are sure to break even and get maximum profit from the business venture.

All you have to do is get the raw/production material listed above and the necessary equipment listed. Then follow the simple step by step guide below, get your packaging container and you are in the world of disinfectants production and superb marketing channel. It is needed in almost every household in your neighbourhood, and at least a bottle of your product (germicide disinfectant) required. It important cannot be over emphasized, then set up a good marketing advertisement and campaign and you are on the go.

Learn more about: AN ENTREPRENEUR

DISINFECTANT AND GERMICIDE MAKING MANUFACTURING equipment
Weighing Scale
Mixer
Filling Machine
Measuring Cylinder

DISINFECTANT PRODUCTION MAKING PROCEDURES AND PROCESSES
Mix the water with the colorant and stir.
Add the phenol and continue stirring.
Add of IPA and the other components
Add flavor and preservative
Pack ready for the market.

Read More

PRODUCTION OF TEXTCOAT PAINT

PRODUCTION OF TEXCOTE PAINT

REAGENTS AND RAW MATERIAL FOR MAKING TEX-COTE PAINT

1. Titanium dioxide (TiO2)
2. ammonia (NH3) 
3. Kerosene (paraffin), 
4. Formalin (CH2O), 
5. Calcium carbonate (CaCO3),
6. kaolin (Clay) from silicate, 
7. Hull or rice husk from paddy grain, 
8. Eggshell, 
9. marble dust or gypsum chalk(rough and soft), 
10. iron oxide red (Fe2O3), 
11. Iron oxide yellow (Fe(OH)2)
12.  and etc.

Paints come in different types and manufacturing needs to suit specific objectives and purpose. The question of what type of paint suit your needs and project is as important as the choice of colour of your paint? We have water-based paint design, Oil paint, Emulsion paint, Cellulose paint, Textured (Tex-cote) based paint, Rubber based Paint, and Bitumen based paint. But when it comes to wall painting, perfect wall finish and superb interior and exterior paint decoration, no other paint does it better than tex-cote paint.

Tex-cote paints are water-based paint used for texture coating of walls and varied interior and exterior decoration of our houses, industries, and offices. Texcote paint shows beautiful textures on walls when masterly painted and systematically designed.

So far, the production and demand for tex-cote paint go beyond boundaries and location. Its well-refined coating texture makes the demand for it on the high side because it is economically viable, challenge it peers, and have good market value, above all it is a worthy business venture.

How then can I produce Tex-cote paint? Below is a step by step process and raw material needed for the production of texcote paint.

Marketing tex-cote paint products can be very easy and non-challenging as almost every home around you has its demand, as old and new residential buildings owners, including renovated structures, preference tex-cote paint for their painting purpose and use.

Learn more about: AN ENTREPRENEUR

TEX-COTE PAINT PRODUCTION EQUIPMENT

1. High speed-disperse mixer,
2. Weighing balance, 
3. Stop-watch, 
4. Gauging stick, 
5. Measuring cylinder

PROCEDURE FOR THE PRODUCTION OF TEX-COTE PAINT

1. Rinse the reactor and discharge the H2O through the filtration tap
2. Measure our 200 liters of H2O (i.e. 10 buckets), if you are to use 7 bags of CaCO3, pour subsequently 60 liters of H2O (i.e. 3 buckets) behind.
3. Measure out 15kg of Titanium dioxide (TiO2) and pour it inside the reaction.
4. Arrange 7 bags of CaCO3: subsequently, pour 3 bags on the reaction. Hence start the reactor to mix the above-mentioned raw material after which you add the remaining 7 bags in the reactor.
5. Measure out 30kg of kaolin and transfer to the reactor.
6. Measure out 30kg polyvinyl acetate (PVA) into a vessel and pour subsequently into the reactor. Measure out 10 liters of H2O (i.e. half bucket) to rinse the vessel used in pouring the PVA in the reaction. Hence after rinsing pour H2O into reaction Arrange a bag of smooth marble dust and pour subsequently 10 liters of H2O (i.e. half bucket) into the reaction to avoid stiffening the reactor.
7. Arrange the bag of rough marble dust and pour subsequently another 10 liters of H2O into the reaction.
8. Weight 3kg of thickener (natrosol) and dissolve in 10 liters of H2O and pour the mixture into the reactor while the reactor is still on.
9. Finally measure out 60mls of formalin (CH2O), 60mls of Ammonia (NH3 (aq) on to the vessel, shake properly and allow the mixture to thicken for 15 minutes in the reactor. Stop the reactor and run-off the mixture through the filtration tap.
10. Then package ready for marketing.

Read More

PRODUCTION OF TILE CLEANER

PRODUCTION OF  PROFESSIONAL TILES/ GROUT/ FLOOR/ BATHROOM/ TOILETS CLEANER OR CLEANING AGENTS/ PRODUCTS

TILES CLEANING SOLUTION RAW MATERIALS FOR PRODUCTION PRODUCTION

1. Hydrochloric acid (HCL)                1 bottle
2. Sodium hydroxide                           500 grams
3. Sodium carbonate                           1 kg
4. Water                                                 30 litres
5. Hydrogen peroxide                         250 grams
6. Fragrance                                          As desired

I am tempted to ask; do you have challenges getting quality tiles cleaner or refined cleaning agents or good cleaning product for your tile's grout, hard, ceramic surfaces and bathtub? Maybe your toilet closets and zinc is no longer presentable for visitors and friends because of stubborn dirt and stains. And how often do you clean, wash or scrub your bathroom or toilet tiles and floors? The key to a sparkling toilet and kitchen zinc, clean tiles and bathtubs in our homes and offices are good maintenance using tiles cleaners.

Today, in modern day Nigerian, almost every households uses tiles, bathtubs, kitchen or toilet zinc. So, this makes the production of tiles, floor, bathroom, toilet or kitchen cleaner solution an essential commodity in every household, and on that note can serve as a good source of income for small scale entrepreneurs.

A well produced tile cleaning agents or toilets cleaner solution can change the surface of your floors, bathtubs, tiles, toilets and kitchen zinc by just applying the solution to the surface. After application, please leave for 30 minutes for thorough sparkling clean effects, then mob or rinse or clean the surface of your bathtubs, tiles, toilets and kitchen zinc with water.

 There are a lot of households who have tiles in their houses. With a little addition of fragrance to the tile cleaner, you are sure to get people buy your product.

Learn more about: AN ENTREPRENEUR

PROCEDURES

1. Weigh 1 litre of HCL into a bowl
2. Weigh out 500 grams of sodium hydroxide and 1 kg of sodium carbonate into the same bowl
3. Add 5 litres of water and stir very well
4. Leave it for 3 hours and add the remaining 25 litres of water
5. Stir very well and leave to stand overnight
6. Sieve out and add the hydrogen peroxide
7. Add a good fragrance of your choice
8. Stir well and package

Read More

PRODUCTION OF BLEACH

PRODUCTION OF BLEACH

BLEACH PRODUCTION RAW MATERIALS

1.    HTH (Chlorine)                3.25 kg

2.    Sodium hydroxide          500 grams

3.    Soda ash                            1 kg

4.    Water                                 20 litres

5.    S.T.P.P                                 250 grams

Today, bleach is common cleaning agents used in laundry businesses. No laundry business can be successful without a very good bleach or quality stain removal. As the name goes, it enhances clothes cleaning, remove tough stains from clothes and keep it sparkling white. It can sometimes serve as cleaning agents for our toilets and bathrooms.

Every household makes use of it, especially nursing mothers; hotels and schools are not left out. Bleach products have wide market spread, as almost every man on the street needs one piece of bleach or stain removal if he does not visit a laundry man.

You can start your own bleach production company by following the simple formula below.   

Learn more about: AN ENTREPRENEUR

BLEACH PRODUCTION REQUIREMENT

1.    Weighing scale

2.    Plastic bowl

3.    Sieve

4.    Stirring rod

5.    Graduated cylinder

BLEACH PRODUCTION FORMULATION PROCEDURES

1.    Weigh out the HTH into the bowl

2.    Add 2.5kg of sodium hydroxide, 1.5kg of soda ash and 860grams of STPP and mix together

3.    Add 10 litres of water and allow standing for 5 hours

4.    Add the remaining 10 litres of water and stir well

5.    Allow to stand for 24hrs and sieve

6.    Add alum to coagulate any residue that might still be in the bleach

7.    Filter and package

MARKETING TIPS:

Bleach does not expire so soon. I will advise you to package in 4 litres jerry can and supply to hospitals, dry cleaners & launders and to families, members of your church and neighbours. When you have enough capital, you can now prepare the good label and more attractive container to be displayed at supermarkets and other shops and compete with big companies.

Read More

INSECTICIDE PRODUCTION

INSECTICIDE

Insecticide are chemical substances that are used in killing insects. Today, war against pathogen spreading insects can not be over emphasized in most household. Mosquito, cobweb, housefly, cockroach and other nocturnal domestic insects makes insecticide products to be in very high demand.

Amazingly, insecticide production can be for you a superb wealth creation platform as the health of millions of people around the world are daily being threatened these pathogen spreading insects.

Start your own insecticide production company today, and see the volume of demand it will drive for you and how far it can enrich you. Below is the formula that can guarantee amazing results for you.  

Learn more about: AN ENTREPRENEUR

INSECTICIDE PRODUCTION REQUIREMENT

1. Grinder
2. Weighing Scale
3. Mixing Chamber
4. Stirrer

INSECTICIDE PRODUCTION RAW MATERIALS

1. Boric acid                                   1 kg
2. Turpe                                          4 litres
3. Industrial Camphor                 500 grams
4. Insecticide Concentrate          1 litre
5. Fragrance                                  As desired

INSECTICIDE FORMULATION PROCEDURES

1. Grind the camphor to fine powder
2. Measure four pints of turpentine and add the camphor to it
3. Add one pint of the boric acid or eucalyptus oil and mix thoroughly
4. Add the fragrance, filter and package into containers.

Read More

EMULSION PAINT PRODUCTION

EMULSION PAINT PRODUCTION MANUAL

HOW EMULSION PAINT IS MADE - MANUFACTURING, MAKING, USES AND COMPONENTS.

Today, every painted house is painted with emulsion paints and its family. This is because it is easily accessible and relatively cheap when to compare to others. Most emulsion paint production either comes in oil base solution or water base depending on the manufacturer flair.

Great care should be taken in order to produce quality emulsion paint because sub-standard emulsion paint might kill sales revenue. Good emulsion paint must not rub off on people after painting. It must not have a residual or bad odour.    

Learn more about: AN ENTREPRENEUR


APPARATUS

1. Mixer
2. Measuring Cylinder
3. Weighing Scale

 RAW MATERIALS QUANTITY

1. Titanium                       17.5 litres
2. Bermocoll                     2 litres
3. Water                            50 litres
4. Calcium Carbonate    5 kg
5. Kaolin                           1 kg
6. Ammonium                 0.5 litre
7. Fadanol                        1 litre
8. Acticide BG                  2 litres
9. PVA                               2 litres
10. Ultracab                       5 5 litres
11. Defoamer                    0.5 litres

PROCEDURE

1. Put the water into the mixer, add titanium dioxide and Ultracab U5 and stir for 30 minutes
2. Add the and kaolin and half of the bermocoll and continue stirring for another 5 minutes
3. Add the calcium carbonate and continue stirring for 20 minutes
4. Add P.V.A and Ammonia and continue stirring
5. Add Fadanol and continue stirring
6. Add Acticide BG and stir for another 5 minutes
7. Add the remaining half of bermocoll and continue stirring
8. Add Defoamer and stir for another 2 minutes
9. Package the paints and you are ready for the market

Read More